DGT 180 DEGREE TURNABLE SOCKET OUTLET

 

PRODUCTS INTRODUCTION

This products is a new patent socket outlet, which can be 180 degree turnable and also have 2USB port(depends on the model), with two sides socket holes, with overload function. It’s high safety level products, can charge most of the electronic products in the market.

 

Plastic material: ABS and the V0 level anti-fire ABS

Power cord: 3*0.75*1.8M

Rated input: 10A, 250v

Rated Output: 10A, 250v

Max loaded power: 2500W

USB input: 100-240v, 50HZ, 5A

USB Output :  SINGLE: USB ,5v—2.1A(TYP)

DOUBLE: USB, 5v--- 2.1A(TYP)

Operation environment: -10 degree to +40 degree

 

PRODUCTS FEATURES:

1,Turntable: This products absorb the function of many socket, and become one turntable sections design, no matter how big your adaptor is, you can plug in this socket easily.

2,Safety: Overload protecting. When the current or the power more than the socket can stand, it will cut off automatically to protect your electric product. When you plug out the overload the appliance, you only need to press the overload button, then it works normal again. ( This function replaced the old fuse, you can use it repeatly)

3,Anti-fire plastic:  Inside plastic all injected with the V0 level ABS, make you using more safety.

4, High effeciency: Two usb port(depend on which model), can charge two device at the same time. The new socket holes design can be used for most of the plug in the world, the copper inside the socket holes is made from high quality copper, high efficiency power transfer, low heat rising, plug in and out more than 5000times without losing. The power cord is government standard 3*0.75mm2 with high level pure copper

5, Compatility: （Depends on which model）, Our USB port with the auto-detect function, can charge most of the electronic device which is 5V.

 

Warning：

*All the devices connect to this product can’t be more than 2500W

*The power cord must be released fully before using. Blinding the wire while using is forbidden.

*Can’t use in the wet environment.

*Not allow to open the plastic cover except electric professional people

*Fire is forbidden, far from the heat place.

*While this product is working, not allow to put any metal things inside the socket holes.

*Please don’t repair, open, change any parts of this product except the professional people. 

*Please don’t put in the place that the babies can touch easily.

Noting:

*When this product is overload, the current more than 10A, and the power more than 2500w, the overload the switch will work in order to protect the devices, after you remove the device, press the red button again, then it works normal again.

*If the USB port is overload, the PCB board will cut off too, and you need to remove the device then it works normal again.

 

【Back】